YC Onion Hot Dog SE Motorized Slider (120cm)

Attachable Motor with Controls
Can Be Used Manually with Motor Removed
22 lb Horizontal/8.8 lb Vertical Payload
DJI/Zhiyun Gimbal Pairing
iOS/Android App Slider/Gimbal Settings
Parallax, Parallel & Panorama Shots
Carbon Fiber Rods
Battery & Power Bank Support

KSh 49,500.00

Add to compare

Guaranteed Safe Checkout

Description

The 120cm YC Onion Hot Dog SE Motorized Slider includes a motor that attaches to the slider carriage to motorize your slides with smooth, consistent motion. Using an iOS/Android companion app, you can program panorama shots, standard parallel shots, and parallax shots using the center rod. The motor attaches to the slider carriage with included screws, and a belt attaches to the motor and the two ends of the slider by quick release clip mounts. You can also remove the motor and belt and use the slider fully manually.

The slider features a 3/8″-16 camera mounting screw, and it supports a camera rig up to 22 lb when horizontal and up to 8.8 lb in vertical mode. The motor can be powered using an LP-E6 battery, or you can utilize an external power bank via the USB Type-C input for longer runtimes. The motor can also be paired with select DJI and Zhiyun-Tech gimbals, and simultaneous motion settings can be assigned for the slider and the gimbal from the same YC Onion app to achieve 4-axis motion control. A carry bag is included to store and transport the kit.

Battery and Power Bank Power

The motor can be powered by an optional LP-E6 battery or an optional USB power bank, which would connect to a USB Type-C port on the motor. A 10000mAh power bank lasts up to 15 hours.

Quick Release Belt

The belt has integrated clips on the end that allows it to be attached to the slider by quick release. An Allen key comes inserted in a dedicated slot on one end of the slider and is used to tighten the belt by tightening the corresponding belt screw, which is also on the end of the slider. The belt can be removed, and the slider used manually.